RFID reader serves as the bridge between the tag data and the system. 

RFID reader connected with an antenna. It reads the data and then passes it to the system for processing the business applications.  AVEA provides readers that can reads out the ID of two types of cards. They are 125 kHz low-frequency and 13.56 MHz high-frequency. Both frequency band provide a short read range of  < 10cm (4 inch). They are great for applications of access control, time attendance, ticketing, payment and data transfer applications.

MF-WEB08S
MF-WEB08S

MF-WEB05A
MF-WEB05A

WEB08S
WEB08S

WEB08S-TA
WEB08S-TA

WEB05A
WEB05A

NET57A
NET57A

KS485S-ID
KS485S-ID

KSU03B
KSU03B

KEY06B
KEY06B

NFC/mifare RFID reader

high-frequency

Reading out the UID of the following card type:

- Mifare1 S50/S70
- Mifare Ultralight
- Mifare Pro
- Mifare DESFire
- Mifare Plus
- Mifare derivatives
For reading the contents using KEYA or KEYB, only S50/70 is supported

NFC/mifare RFID reader >

125 kHz RFID reader

low-frequency

Reading out the ID of the following card type:

- EM4001
- EM4100
- EM4102
- TK4100
- TK4102

 125 kHz RFID reader >


open platform
open platform

 With open communication standard

All readers are developed under an open communication standard. Reader can be integrated into your applications easily and users can design their RFID applications with no limit.

rfid reader with relay control
rfid reader with relay control

 Built-in with relay control

In the past, RFID readers must be used with controller for access control. As one of the most important function of controller is to provide relay output for the electric lock. AVEA's readers are built-in with controllable relay output on the terminal blocks. It would be a good solution for your project, especially when there is a limit budget.

connect to pc
connect to pc

 Emedded with RS232 / RS485 / Ethernet interface.

We have products in different communication interface that can easily be connected to the computer. It ranges from the simplest USB keyboard reader to the RS232, RS485 or Ethernet IoT reader.